Polypropylene Conjugated Ring
Polypropylene Conjugated Ring is a improvement of Intalox Ring type filler.
Polypropylene Conjugated Ring was designed in South China science&engineering university. Its characteristic is as follows:
1. It does not occur that rings are overlap along axial direction when dumped them in tower.
2. Its inter-tendon structure in conjugate shape and liquid can be equilized distribution on the filler surface.
3. The inter-tendon of abutting ring has more contact points with surface, therefore, liquid intensifies concourse and disperse and membrane surface update continuously.
For these features, Polypropylene Conjugated Ring has lower risistance to the liquid, gas and liquid contact area bigger, have improved transfer performance and the hydromechanics of filler. So Conjugated Ring is a kind of filler with high transacting capacity, low pressure drop and high mass tranfer efficiency as well as operating flexible.
Please find the following technical data sheet for: Polypropylene Conjugated Ring
D×H×δ
mm |
Surfacearea
m 2 /m 3 |
Void olume
m 3 /m 3 |
Bulknumber N m -3 |
Density Kg/m 3 |
F factor
m( -1 ) |
| 25×17.5×1.0 |
228 |
0.90 |
74000 |
65.2 |
312.8 |
| 38×19×1.2 |
132.5 |
0.91 |
18650 |
54.5 |
175.8 |
| 50×25×1.5 |
114.2 |
0.927 |
9200 |
49.2 |
143.1 |
| 76×38×2.6 |
90 |
0.929 |
3980 |
63.5 |
112.3 |
| 100×50×3 |
76 |
0.941 |
1800 |
45 |
101.1 |
|
