Infrared Ceramic Tile is cordierite based ceramic heating element. It's widely used in gas radiant heaters and plays the most important part in those applications. The interlaced corrugated surface of the ceramic tile combined with honeycomb design basis provides a superb surface area and working burning surface. We have also adopted the best raw material and new formula to maximize the micro-porosity of the tile. With all these advantages, the oxygen mix completely with the gas, burning without flame, emitting high efficiency far infrared ray and radiant heat, saving up to 40%-50% energy cost. Our ceramic engineer has designed a unique manufacturing machine, which enables us to control the shape and the hole diameter to an enhanced precision level. After test on the real oven, the ceramic tile can generate uniform and high efficiency infra-red burning.       Surface Pattern       ICT-A ICT-B ICT-C     Barbecues Broilers Convection Ovens Deep Fat Fryers Evaporators Gas Ovens Griddles Greenhouse CO2            Gyro Cookers Pizza Ovens Pressure Fryers Process Ranges Rotisserie Ovens Space Heaters Sear Cookers l Outstanding Strength lUniform radiant burning lExcellent thermal shock resistance lSave up to 30~50% energy cost. lBurn without flame, high burning efficiency, low noise. lReduce the harmful gas such as CO, NOx, etc more than 90%           Sample Dimension Square(mm) RoundShape Diameter (mm) Thickness (mm) Hole diameter (mm) Holes Interval (mm) <180×180 50--200 8--15 1.2—1.8 1.649—2.086 Physical Properties Porosity Density Coefficient of Thermal Expansion 0--800℃ Modulus of Rupture Results Thermal Shock 800℃ into the cold water 50%-60% ≌1.2g/m3 3.5×10-6 ≥300lbs/in2 More than 3 times Does not blast open Performance Harmful Gas Release During Use Co ≤0.006% NOx ≤5ppm