|
Backwashing filter cap
Backwashing filter cap
Backwashing filter cap is a filter water distribution system at the bottom of soda backwashing device, it can effectively flush out the filter in the sludge and debris to ensure normal operation of filter quality and quantity; filter head types (long, short-throw) grinding mushroom type, plum-type, tower type and cylindrical type, are used ABS plastic into a reasonable structure, connecting solid pressure, high strength, gap unchanged type, can plate without a dead zone, not the plot of soil, the effect is good, (per hour displacement) 0.25 tons, 0.5 tons, 1 ton. Long-handled filter commonly used in soft drinks filter backwashing water distribution system; brevipes first applied to a single filter backwash water, and gravity-type, pressure type filter tank and filter bed ion exchange water treatment equipment.
|
Name
|
Concrete target
|
Performance index
|
Concrete target
|
Filtration area
|
|
Filtered water hat
|
ABS
|
1×40
|
25×0.25
|
2.5
|
|
Strainer
|
ABS
|
1
|
φ20
|
3.14
|
|
Filters the hat place
|
ABS
|
1
|
φ0.24
|
0.48
|
|
Seal packing collar
|
Non-toxic rubber
|
1
|
φ30
|
1
|
|
The product buries the drive pipe
|
ABS
|
1
|
φ30
|
1
|
|
Longitudinal strength
|
21-28mpa
|
Shock strength
|
27-49Kg/cm
|
Luo river degree of hardness 62-86
|
|
